EXTRACUT Metal Lab Cutting Wheels precision thin cutting discs built for clean, low-burr separation cuts in metal, rebar, and structural sections. A reinforced resin bond with premium aluminum oxide or zirconia abrasive delivers fast, controllable cutting on angle grinders and chop saws with minimal heat and spark.
Key Features
- Thin-Kerf Precision Cut — Ultra-thin profile (1.0–1.6mm) produces clean, low-burr cuts with minimal material loss.
- Reinforced Safety — Fiberglass mesh reinforcement meets EN 12413 for safe operation at rated speed.
- Fast Cut Rate — Premium AlOx / Zirconia abrasive cuts quickly through steel, stainless, and rebar.
- Low Heat and Spark — Optimized bond minimizes the heat-affected zone and discoloration.
- Universal Arbor — Standard 22.23mm bore fits all major angle grinders and chop saws.
- Grinder and Chop-Saw Ready — Available in sizes for both handheld grinders and bench chop saws.
Applications
Metal fabrication, rebar and stud cutting, steel stock separation, pipe and tube cutting, and general job-site metal cutting on angle grinders and 14" chop saws.
Specifications
| Specification |
Value |
| Type |
T41 (Flat) / T42 (Depressed Center) |
| Abrasive |
Aluminum Oxide / Zirconia Alumina |
| Diameter |
Ø115mm / Ø125mm / Ø355mm (14" chop saw) |
| Thickness |
1.0mm – 1.6mm (thin-kerf) |
| Bore |
22.23mm (7/8") Standard |
| Max RPM |
13,300 (Ø115) / 12,250 (Ø125) / 4,400 (Ø355) |
| Materials |
Steel, Stainless, Rebar, Structural Sections |
| Safety |
EN 12413 Compliant (Reinforced) |
| Cutting Speed |
60 – 80 m/s (linear) |
| Life |
30 – 150 cuts (material dependent) |
